⎝⎛大家玩棋牌⎞⎠

Hailing Magnetic Powder Brake >> Magnetic Powder Clutch >> Double Outlet Frame Water-Cooled Magnetic Powder Clutch (CJS Type)

Magnetic powder clutch

Complete dynamometer system

Magnetic powder brake

Magnetic powder clutch

Tension control system

Photoelectric correction system

Magnetic particle

Double-outlet frame water-cooled magnetic powder clutch (CJS type)

Model and parameters

Specifications
Rated torque Nm
Rated current A
Slip power Kw
Magnetic powder dosage g
cooling method
Dimensions
Shaft coupling size
Mounting size
H
L
d (h)
b
L1
L2
L3
A
B
H1
S
d1
CJS-10
100
2.5
2.5
150
Rotor water cooling
314
450
30
10
65
55
60
110
255
170
90
11
CJS-20
200
2.5
3
300
Rotor water cooling
368
480
35
10
60
50
59
120
285
200
120
13
CJS-40
400
3
4
400
Rotor water cooling
418
540
45
14
95
85
twenty four
220
300
220
120
13
CJS-50
500
3
4.5
450
Rotor water cooling
418
540
45
14
95
85
twenty four
220
300
220
120
13

Attention points introduction model and parameters

Points to note during operation :

1. Water-cooled brakes should not exceed 90 ° C, and forced air-cooled brakes should not exceed 60 ° C.

2. For water-cooled surfaces, the temperature should not be lower than 50 ℃ to avoid condensation. When the surface temperature is too low, the water supply should be appropriately reduced.

3. Water and wind cooling type During operation, water and wind cannot be cut off. If it is not guaranteed that water supply and wind will not be interrupted, water cutoff and wind protection devices should be installed.

4. If circulating water is used for cooling, it is recommended to add an anticorrosive to the water and change the fresh water every other month

Features : The double-outlet-type water-cooled magnetic powder clutch (CJS type) can transmit a certain amount of torque regardless of the slip, and has the advantages of fast response speed and simple structure. , Is a multi-purpose, high-performance automatic control element.

Magnetic powder clutch works:

1. Coil stationary magnetic powder clutch and magnetic powder brake are automatic devices that control input current and change output.

2. When the coil is not energized, the input shaft rotates, and the magnetic powder is pressed against the inner wall of the clamp ring under the action of centrifugal force. The output shaft does not contact the input shaft. At this time, it is idling.

3. When the coil is energized, the magnetic powder generates a magnetic chain under the action of the magnetic field lines, so that the output shaft and the input shaft become a rigid body and rotate, and a slip occurs when overloaded, which is the working state at this time. So as to achieve the purpose of transmitting torque.

Magnetic particle dynamometer

Torque sensor

Tension transmitter

AMA electrical parameter acquisition instrument

TR1C Torque and Speed Collector

Electric drum test bench

斗牛平台 韦德足球 欢乐拼三张 欢乐拼三张