SK type manual tension controller
SK type manual tension controller (stable current power supply) is specially designed for magnetic powder clutches, magnetic powder brakes, and production lines that require tension adjustment and control. The output load current is continuously adjustable from 0 to the nominal value, and the LED displays the output current and voltage simultaneously. SK type manual tension controller (stable current power supply) has stable power output, excellent ripple coefficient, and has perfect overcurrent limiting protection function.
How to use 1. Turn on the power 2. Connect the external load to the "+", "-" output terminals (the magnetic powder is not divided into positive and negative poles)
3. Turn the power on to the "ON" position;
3.Adjust the current rotation and set the required current value.
Technical parameters 1. Working conditions: Ambient temperature -10 ℃ ～ 40 ℃ Relative humidity is not more than 80%;
2. Input power: AC 210 ～ 230V 50HZ;
3. Rated output:
|model||Display method||Output voltage DC||Output current DC|
|SK-1A||Digital display||0 ~ 30V||0 ~ 1A|
|SK-2A||Digital display||0 ~ 36V||0 ~ 2A|
|SK-3A||Digital display||0 ~ 40V||0 ~ 3A|
|SK-5A||Digital display||0 ~ 50V||0 ~ 5A|
Four, matters needing attention 1. If the fuse is blown, the cause of the burn should be found out, and then replaced with a fuse of the same value;
2.For a long time, it is strictly forbidden to touch the heat sink on the rear panel to avoid burns.