Characteristics and precautions of magnetic powder brake
The magnetic powder brake can easily control a wide range. Can achieve continuous sliding operation. A stable torque can be obtained. No tweet sound. 所以运转相当安静。 The slipping phenomenon of the action surface occurs in the friction mode, but it does not appear here, and no connection sound is emitted, so the operation is quite quiet. The heat capacity is large. 动运转，也可以安心使用。 Due to the use of magnetic powder with excellent heat resistance and the ideal cooling method , it can be used safely even in the severe continuous sliding operation. Can achieve smooth continuous and driving state. 产生震荡，可以因应负载加减速度。 Since the static friction coefficient and the dynamic friction coefficient are almost the same, vibration will not occur when fully connected, and it can respond to the load acceleration and deceleration. 请注意湿气。 Precautions for using magnetic powder brake: please pay attention to moisture. If the magnetic powder gets wet, its performance may become unstable, so be careful not to let oil or moisture penetrate into the inside. Especially when mounted on a gearbox, the oil will penetrate the shaft through the shaft, so it must be completely sealed with a film. Pay attention to the surface temperature. 90 度以下，超过该数值时，耐久性会 大为降低。 The maximum surface temperature caused by continuous operation is 90 degrees or less during operation. When the maximum temperature is exceeded, durability will be greatly reduced. Be sure to use the above-mentioned limit temperature as the standard, and keep it within the allowable sliding working rate during use.