Summary of magnetic powder brake installation methods, don't look too bad! !!
Magnetic powder brake is based on electromagnetic principle and uses magnetic powder to transmit torque. It has the characteristics of a substantially linear relationship between the exciting current and the transmission torque. It can transmit a certain torque under the condition that has nothing to do with the slip, and has the advantages of fast response speed, simple structure, no pollution, no noise, no shock vibration and energy saving. Magnetic powder brake is a multi-purpose, high-performance automatic control element. Magnetic powder brake can effectively control mechanical power in daily life and production, so the safety in industrial production is very high. Now mainly used in papermaking equipment and textile machinery.
Below we mainly come to understand the matters needing attention in the installation process of magnetic powder brake . The specific points are as follows:
1. Note that the gland can be tightened only after the coupling is aligned. During the tightening process, pay attention to the uniform support. Keep the gland parallel to the end section. After tightening, measure the fulcrum to maintain the maximum The error is within 0.05 mm.
2. During the installation process of magnetic powder brake , there are a lot of installation deviation problems that need to be paid attention to. They must be avoided as much as possible. The fit gap between the gland and the outer diameter of the shaft must be kept uniform, and the error of each fulcrum cannot exceed 0.01. Mm.
3. The compression amount of the spring should be carried out in accordance with regulations. It is not allowed to be too large or too small, and an error of 2.00 mm is required. Because if it is too large, it will increase the specific pressure between the end faces, resulting in severe wear, and if it is too small, it will cause a poor sealing effect.
4. After the moving ring is installed, it must be able to move flexibly on the shaft. After pressing the moving ring against the spring, it should spring back automatically.
The magnetic powder brake must be installed in strict accordance with the installation instructions provided by the manufacturer or installed by after-sales technicians, or it will cause more serious consequences. The main products of Nantong Hailing Magnetic Powder Brake Manufacturing Co., Ltd. are magnetic powder brakes, magnetic powder clutches, magnetic powder dynamometers, etc., which are widely used in reducers, motors, traction machines, drilling rigs, hydraulic motors, fans, electric actuators, tractor axles And other industries make precise measurements of torque, speed, power, efficiency, electrical parameters, and more. Our magnetic powder brakes and other products comply with industry standards and are equipped with instructions for use. The product quality is reliable, the quality is guaranteed, and it is trustworthy.